Product Details
HVP702A1 is a portable dental X-ray imaging device powered by a rechargeable lithium polymer battery pack which can produce X-rays for dental examinations. HVP702A1 consists of X-ray tube assembly, circular beamlimiter, control panel, handheld switch, battery, charging adapter, band, remote exposure switch (optional). The HVP702A1 is an X-ray product that can be combined with imaging sensors or film devices to capture images of the teeth in the patient’s mouth.
Application:
HVP702A1 is a portable dental X-ray imaging device that uses imaging sensors in the mouth to acquire images for dental diagnosis.
Specification:
Item | Specification |
Touch the serial screen | Maximum area size: 4.3 “valid |
Display size (mm) : 95.04 (L)×53.86 (W) |
Touch type: R: resistive
Ratio: 16:9 |
Resolution: 480×272 |
Brightness (nit) : 300 |
TFT Type: IPS |
Operating voltage (V):4.5-6.0 |
Hibernation current (mA) : 0.25 |
Operating temperature: -20℃ to +70℃ |
Battery | Voltage: 12V (Max 16.8V) |
Current: 10C (continuous 10A) |
Capacity: 2500mA |
Maximum operating current: 25A |
Battery type: Lithium polymer |
Charger | Input voltage: AC100-240V/ Current 1A/ Frequency: 50/60Hz |
Output voltage: DC16.8V/ Current: 1000mA |
Remote exposure interface | Interface: RJ11 less than 300ms |
Exposure handle | Size: 10cm×3cm |
Tube voltage [kV] | 70kV |
Tube current [mA] | 2mA |
Maximum power output | 140VA |
Maximum error | Tube current -5% Tube voltage ±5% |
Minimum focal length | 200mm |
Maximum service time | 2 seconds (70kV/2mA) |
Total filtration | 1.8mmAI |
Cooling time | 30 times the ray opening time |
Tube current and tube voltage rise time | Within 100ms |
X-ray tube | Focal point: 0.4mm |
Target Angle: 12 degrees |
Anode heat capacity: 4500J |
Natural filtration: min. 0.8mmAI/75kV |
X-ray beam area: 70mm at SID 200mm |
Product size
